Xerox 6030 User Manual page 79

Operation Procedure
MENU
SYSTEM PARAMETER
SYSTEM PARAMETER
Spool in HD
Spool in HD
OVERFLOW
1
Press the <
PARAMETER] displayed.
2
Select the item that is to be set up with the use of
the < > and <
<
[Set Date], [Spool in HD], [AUTO ROLL]
[Smoothing], [Low power mode 1], [Low power
mode 2], [Sleep Mode], [Stamp Auto Mode],
[Attention Light], and [Job Recovery] will be
displayed in this order.
3
Select the parameters with the use of the < >
*
and < > keys, and then press the <Set> key.
An [*] mark will be displayed on the right-hand
side of the value once it has been set.
3.2 Setting up the System Parameters
> key with [SYSTEM
> keys, and then press the
> key.
The changed parameters are reflected
back on the system when the <Set> key is
pressed. It is not necessary to separately
save the changes afterwards.
55