Xerox 6030 User Manual page 65

Centronics (optional)
The following communication parameters need to be set up.
Ack Mode
DMA Timeout
EOP Timeout
Job Separation
VPI (optional)
The following communication parameters need to be set up.
REPORT
OFFLINE
EOP Timeout
Job Separation
Menu Item
The Ack mode is selected from [MODE0], [MODE1],
[MODE2], [MODE3], and [MODE7].
The default setting is [MODE0].
The timeout value for data input is entered within a range of 1 to
255 seconds.
The default setting is [5 sec].
The timeout value is entered within a range of 1 to 255 seconds.
The default setting is [10 sec].
Sets the job separation. The default setting is [NO].
[YES]
[NO]
• If a value higher than [255] is entered for the timeout value, [255] will be set as the
value.
• Changes to the [Ack Mode] and [DMA Timeout] values will have not any effect on
operations.
Menu Item
Sets whether to issue the host with offline notification of paper
running out or not.
The default setting is [NO].
[YES]
[NO]
The timeout value is entered within a range of 1 to 255 seconds.
The default setting is [10 sec].
Sets the job separation. The default setting is [NO].
[YES]
[NO]
If a value higher than [255] is entered for the timeout value, [255] will be set as the
value.
Description
Starts conversion processing once the command
that recognizes the end of the data is received
even midway through the file.
Performs the spooling process on the hard disk
until a timeout is issued.
Description
Issues offline notification.
Does not issue offline notification.
Starts conversion processing once the command that
recognizes the end of the data is received even
midway through the file.
Performs the spooling process on the hard disk until
a timeout is issued.
3.1 Setting up Communication Parameters
41