Printing Long Documents - Xerox 6030 User Manual

Printing Long Documents

It is possible to set up the method of cutting paper to either the standard A0 format cut
(length of 1,189 mm), the standard shape increased in a multiple of integers, or the
synchronization cut.
This parameter is set up with the use of the [Output Option] function for the logical
printers.
[AUTO] : The standard shape priority mode. If the length of the document exceeds the
[OTHER] : Synchronized cuts performed on all images.
[MIX]
[MIX2] : If images that are smaller than the A0 size exceed the standard size,
Input image that is longer
that the standard size
68
Chapter 4 Basic Machine Operations
standard size, the paper is cut to the standard shape that has been increased
by a multiple of integers.
: If images that are smaller than the A0 size exceed the standard size, the paper
is cut to the standard size that has been increased by a multiple of integers.
Synchronized cuts are performed on all images that exceed the A0 size.
synchronized cuts are performed on all images.
• Synchronized cutting is where the length of the paper is cut to a non-standard size
that matches up with the length of the image.
• All output is carried out on roll media when [OTHER] has been selected. Cut sheet
cannot be used.
Refer to the "Output Option" section of "4.5 Logical Printer Settings" for details on
available functions (page 112).
Output image
In the case of [AUTO]
Output in a size that
is the standard shape
increased in integers.
In the case of [OTHER]
The same size as the
input image is output.