Setting Up Communication Parameters - Xerox 6030 User Manual

3.1
Setting up Communication
Parameters
It is necessary to connect the 6030/6050 Wide Format printer to the host before it can be
used for printing.
This section explains the procedures required to set up the connection parameters for the
interface that is already installed within the 6030/6050 Wide Format printer.
It is possible to print out a list of the parameters that have been set up for verification
purposes.
Communication Parameters
This section explains the various communication parameters available.
•
TCP/IP
•
Serial
•
Centronics (optional)
•
VPI (optional)
•
SNMP
38
Chapter 3 Setup
SNMP can only be set up from Print Services on Web.