Xerox 6030 User Manual page 208

Unimplemented TYPE x
Status: Transfer by the non-supported type was instructed.
Action: Specify [ Image (Binary) ] or [ ASCII ] with the TYPE command.
User
Status: Logged in with a user name not registered.
Action: Log in with a registered user name. In the factory, only [ ftpusr ] is registered as the
user name.
USER and PASS required
Status: A user name or password was not specified by the USER or PASS command. Or
various commands were transferred without login.
Action: Log in with a registered user name and password and try again.
184
Chapter 6 Ethernet Print Service (for UNIX)
"xx" is not existed, need account for login