Xerox 6030 User Manual page 168

Mapping
A2
Media
MANUAL
Media.
A0
Media.
A1
SPLIT
EDIT HPGL
SPLIT
SPLIT
YES
Split Mode
Length
Length
01189 mm
144
Chapter 5 Setup Using the Printer Control Panel
*
*
1. Select either [Auto] or [MANUAL], and then
2. Press the <
3. Select the paper size with the use of the < >
*
1
:06
2
*
3
4
*
When [Mapping] has been selected
Select the paper size with the use of the < >
and < > keys, and then press the <Set> key.
When [Media] has been selected
press the <Set> key.
> key if [MANUAL] has been
selected to move to the paper size setup
screen.
and < > keys, and then press the <Set> key.
Display [SPLIT] on the setup item selection
screen, and then press the <
Select whether or not to perform fragmentation
printing with the use of the < > and < > keys,
and then press the <Set> key.
Press the < > key once the selection has been
set if fragmentation printing is to be carried out.
Select the item that is to be set up with the use of
the < > and < > keys, and then press the
< > key.
The [Length], [Page No] [Margin] and [Mark]
parameters will be displayed in that order.
Select the parameters with the use of the < >
and < > keys, and then press the <Set> key.
> key.