Media Specifications - Xerox 6030 User Manual

13.2

Media Specifications

•
For sharp image copying by 6030/6050 Wide Format, use media recommended by our
company.
•
To prevent paper jams or uneven printing, do not use creased, wrinkled, or curled
media. It may result in a media jam and white blotches on copies.
•
When using unusually flexible media, support the media as it comes out of the media
ejection port so that it will not be pressed against the media table and result in jams.
•
Moisture is not good for media. For storage, wrap the media in our company's
wrapping paper and store it in a relatively dry place.
Vellum media especially should be put into a plastic or moisture-proof bag that
contains desiccant.
•
When the machine is not used for a long period of time, remove the media and store it
accordingly.
Media type
Mass
Size
Recommended
media
Media not available
*1 Option
*2 A4 size can only be fed vertically.
240
Chapter 13 Specifications
Item
Bond, Vellum, and Film
52.3 to 81.4 g/m
Roll
Manual loading
M.S.I.
Bond (Roll)
Bond (Cut sheet) : L, P, ES-R, and Green 100
Vellum (Roll)
Vellum (Cut sheet)
Film (Roll)
Film (Cut sheet) : PF90
Chemical-based paper
GSN65
Kent paper
Description
2
(45 to 70 kg)
: Minimum width 297 mm, maximum
width 914 mm (standard size paper)
*1
: Minimum width 210 mm, maximum
width 914 mm (standard size paper)
*2
: A3 (horizontal feed), A4 (vertical/
horizontal feed)
: E, ES-R, E (Heavier), and Green 100
: SX55 and GX75
: SX55
: PF90
*2 and GX75