Xerox 6030 User Manual page 42

Size Mapping
When a table determining correspondence between input document sizes and output
image size is established beforehand, a document can be enlarged or reduced
automatically in accordance with the size mapping table. This function is called "size
mapping".
Input document size
Media Mapping/Automatic Mapping
When a table determining correspondence between output image size and paper sizes are
established beforehand, the output paper size can be determined in accordance with the
paper mapping table. This function is called "media mapping".
When "Automatic Mapping" is selected, the output paper size can be determined
automatically to match the output image size. This function is called "Automatic
Mapping".
Output document size
18
Chapter 2 Knowing Your Printer
Enlarge
A2
Reduce
Refer to the "Size and Media Mapping" section of "4.5 Logical Printer Settings" for
more details (page103 ).
Check mapping to be sure the media size selected matches the media loaded in the
printer. Refer to "Size and Media Mapping" section of "4.5 Logical Printer Settings" for
more details (page 84)
A3
Rotated 90 degrees
A1
A3
Output image size
A3 Output on A3 roll media
Paper
Output on A2 roll media
A3