Xerox 6030 User Manual page 207

Login failed
Status: The user name and password do not match.
Action: Log in again with the correct user name and password.
No file found or invalid directory or permission problem
Status: Failed to open the directory by the LIST command.
Action: Wait for some time and transfer the command again.
Parameter not accepted
Status: Other than ASCII or Binary is specified by the TYPE command.
Action: Specify ASCII or Binary.
Syntax error: Please specify file structure only
Status: Other than a file structure is specified by the STRU command.
Action: Specify a file structure.
Syntax error: Please specify representation type
Status: A transfer type was not specified by the TYPE command.
Action: Specify the correct type.
Syntax error: Please specify send file name
Status: A file name was not specified by the STOR command.
Action: Specify the correct file name.
Syntax error: Please specify stream mode only
Status: A non-stream mode is specified by the MODE command.
Action: Specify the stream mode by the MODE command.
Time-out: closing control connection
Status: The connection is disconnected because nothing was transferred to the FTP within
the specified time.
Action: For another transfer, establish connection again.
6.3 Printing Using the ftp Command
183