Changing Output Roll Media For An Entire Job - Xerox 6030 User Manual

Wide format printer
Hide thumbs Also See for 6030:
Table of Contents

Advertisement

Changing Output Roll Media for an Entire Job

By setting the [Size] on [Output Option] to [AUTO] (either [AUTO], [OTHER], [MIX]
or [MIX2]), the output paper is determined in accordance with the logical printer's
[Media mapping] table. If a paper mapping table is prepared for each job, it is possible to
change the output roll media for each job.
For example, if an A1 roll media and an A2 roll media are set in place and the A2 roll
media is to be used for printing out the A2 size [Job1] job and the A1 roll media to be
used for printing out [Job2], which is also in A2 size, the mapping table is set up as
follows.
[PLT01H] logical printer settings
In this example, [Job1] has been specified to use logical printer [PLT01H], which will
output the job on the A2 roll media.
[Job2] has been specified to use logical printer [PLT02H] and rotate the job by 90
degrees to print it out on the A1 roll media.
Job1
Job2
66
Chapter 4 Basic Machine Operations
Image Size
Media Size
A0
A1
A2
A3
A4
Logical printer
A2
[PLT01H] specified
Logical printer
A2
[PLT02H] specified
Refer to the "Size and Media Mapping" section of "4.5 Logical Printer Settings" for
details on available functions (page 103).
[PLT02H] logical printer settings
A0
A1
A2
A3
A4
Rotated by
90 degrees
Image Size
Media Size
A0
A1
A2
A3
A4
Output on the
A2 roll media
Output on the
A1 roll media
A0
A1
A1
A3
A3

Advertisement

Table of Contents
loading

This manual is also suitable for:

6050

Table of Contents