Xerox 6030 User Manual page 214

Cancel (lprm Command)
This section explains how to cancel a print job submitted from the network.
Format
lprm [-P<Logical Printer Name>] <Job ID>
-P<Logical Printer Name>
Specify a logical printer name immediately after P (with no space) to cancel a print job
under processing by the specified printer. If no logical printer name is specified, a print
job under processing by the logical printer lp is canceled.
Specify a job ID to cancel its printing. The status display command [ lpq ] displays
<Job ID>
job IDs. If this is omitted, every possible print job is canceled.
Examples of use
Example 1:Displaying the status of the logical printer [plt01h] and canceling the printing of
job ID [124].
% lpq -Pplt01h
Job ID Sent By
cosmos: sending to oklahoma
Rank
1st
2nd
% lprm -Pplt01h 124
job 124 dequeued
%
190
Chapter 6 Ethernet Print Service (for UNIX)
Job IDs on the 6030/6050 Wide Format side and the client side are allocated
separately.
Status
123 williams Printing
124 smith Queued
Owner Job
smith 416
smith 417
Prior. Document Name
Normal drawa.hpgl
Normal drawb.hpgl
Files
drawe.hpgl
drawf.hpgl
Prt Size(KB)
O1H 980
O1H 5963