Skip Command
Enables and disables the PS command.
Settings
The settings for this function are as follows.
Menu Item
PS Command [OFF]
EOP Command
Enables and disables the EOP command.
Settings
The settings for this function are as follows. The default value for all parameters is
[Enable].
SP:Pen0
PG:Adv Page
NR:
FR:
AF:
AH:
108
Chapter 4 Basic Machine Operations
These settings are only valid with HPGL data.
[ON]
The default setting is [ON].
These settings are only valid with HPGL data.
Menu Item
Sets whether the SP: Pen0 command is to be enabled or not.
Sets whether the PG: Adv Page command is to be enabled or not.
Sets whether the NR command is to be enabled or not.
Sets whether the FR command is to be enabled or not.
Sets whether the AF command is to be enabled or not.
Sets whether the AH command is to be enabled or not.
Description
Enables the PS command.
Disables the PS command.
Description