Reference Information; Network Port Requirements; Ip Link Pro Control Processors - Extron electronics IPCP Pro 250 User Manual

Reference Information

This section of the guide includes the following reference items:
•
•
•
Full product specifications are available via the IPCP Pro Series product pages at
www.extron.com.

Network Port Requirements

Network administrators may find it useful to know which ports, protocols, and
services are used by the IP Link Pro control processors, TouchLink Pro Touchpanels,
Global Configurator Plus and Professional software, Toolbelt, and Extron Control for iPad (for
IP Link Pro control sytems). The following tables provide that information as a reference for
network planning and troubleshooting. The following definitions apply:
•
•

IP Link Pro Control Processors

Network Requirements
File Types: a Key to Extron-specific File Names
Licensed Third-Party Software Used in the Control Processors
Inbound — The Extron control hardware listens for inbound traffic on the specified port.
Outbound — The Extron control hardware sends outbound traffic to the specified port.
Ports and Protocols for Control Processors
Inbound/ Port Protocol
Outbound
Inbound 80 TCP
Inbound/ 123 UDP
Outbound
Inbound 443 TCP
Inbound/ 4502 UDP
Outbound
Inbound 4503 TCP
Outbound 4504 UDP
Inbound 4522 TCP
Outbound 5555 UDP
(config-
urable)
Outbound Various TCP/UDP
Service Description
HTTP Port redirects to HTTPS
NTP NTP service
HTTPS Default Web pages, GlobalViewer,
Extron Control for Web
Discovery Broadcast network discovery
SSH Internal system messaging
Trace Extron trace messages
SFTP File transfer
GVE GVE protocol
Drivers Outbound connections for Ethernet
device control
IPCP Pro Series • Reference Information 32