Table of Contents
Advertisement
NTI PRIMUX MATRIX KVM SWITCH VIA CAT 5
Host Configuration Menu
The Configure Hosts menu allows you to configure host adapter settings. Select "Host Configuration" in the Main Menu and press
<Enter> to open the Configure Hosts submenu.
From the Configure Hosts list, move the selection bar (using the up/down arrow keys) to a listing to be edited and press <Enter>
to make a selection. The Edit Host menu will open for that listing.
From the Edit Hosts menu, characteristics for specific Host Adapters can be specified.
Function
Description
Name
Modify the name (of the selected Host Adapter)- enter a
character string- 16 characters max., case sensitive.
Mac Mode
Designate a Host Adapter to be connected to a Mac
Default = No
User Access To
Select which users will have access to this Host Adapter
Host
(By default, no users have access except for "root" and
other users with administrative rights.)
Share Mode
Configure sharing for the Host Adapter.
Options are None, Limited, and Full.
See more on Share Mode on page 47.
Delete
Delete Host Adapter from Host Adapters list
Y / N Confirmation required
Esc
Return to Host Adapter List
Figure 48- Telnet- Configure Hosts
Figure 49- Telnet- Edit Host
Default = None
46
This page also displays the firmware revision of
the Host Adapter, the part number (also found on
a label on the case of the Host Adapter), and the
type of Host Adapter (USB or PS2).
The part number is used to identify the Host
Adapter when it is auto-discovered by the
SWITCH. Until the name is changed, this will be
the name displayed in the Host List.
Advertisement
Table of Contents
