NTI PRIMUX MATRIX KVM SWITCH VIA CAT 5
User Station Configuration Menu
Select "User Station Configuration" in the Main Menu and press <Enter> to open the User Station Configuration submenu.
From the Configure User Stations list, move the selection bar (using the up/down arrow keys) to a listing to be edited and press
<Enter> to make a selection.
Function
Description
Name
Modify the name-enter a character string
16 characters max., case sensitive.
Auto-login
Toggle selection to Enable or Disable Auto-login feature-
determines if a user will be logged-in when the User Station is
powered-ON or when <F1> is pressed at the log-in prompt.
Auto-login user
Select which user will be the Auto-login user to be automatically
logged in at power up
Delete User Station
This will delete the selected User Station from the User Stations list,
removing all configuration information regarding that User Station.
See Note below
Note: Before using the "Delete User Station" option, be sure to access the OSD menu of that User Station and change
the operating mode from "Matrix" to "Standalone" if the User Station is going to be used as a standalone unit.
page 36 for the location of this setting.
Figure 52- Telnet- Configure User Station
Figure 53- Telnet- Edit User Station
49
See the