NTI PRIMUX MATRIX KVM SWITCH VIA CAT 5
Restore Settings to Defaults
Select "Restore Settings to Defaults" in the Main Menu and press <Enter> if you want to remove all custom configuration
settings and restore the PRIMUX Matrix Switch back to the settings it came with from the factory. Before this selection will take
effect, you will be prompted (as shown in the image below) to confirm this selection.
To reset settings to factory defaults, select "Yes" by pressing <Tab> first to highlight, then press <Enter>.
To cancel the selection, press <Enter> for "No".
Note: Using "Restore Settings to Defaults" will disconnect your telnet session.
Figure 58- Telnet- Restore Default Settings
52