Table of Contents
Advertisement
NTI PRIMUX MATRIX KVM SWITCH VIA CAT 5
Materials
Materials Supplied with this kit:
NTI PRIMUX-16x64 or 8x32-Cat5
KVM Matrix Switch
Materials Not Supplied, but REQUIRED:
•
NTI PRIMUX-UZR User Station
•
NTI HA-UNV PS2/USB Host Adapter (Includes a CT7038 USB-PS2 Adapter) / HA-SUN-MTX SUN Host Adapter / HA-RS-
M Serial Host Adapter (see pg. 6)
•
CAT5/5e/6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg.
60 for proper EIA/TIA 568B wiring method)
•
A null modem cable will be required for future software updates (included with your PRIMUX-UZR). See pg. 61 for
specifications.
•
NTI RJ45MF-RS232-CO serial crossover adapter will be required if an HA-RS-M is installed and connected to a DCE type
serial device (see page 8)
Cables can be purchased from Network Technologies Inc by calling 800-RGB-TECH (800-742-8324) or (330)-562-7070 or by
visiting our website at www.networktechinc.com.
Please Note:
The PRIMUX User Station and Host Adapters used in conjunction with the PRIMUX Matrix Switch must
all be running firmware version 2.0 or later in order to be compatible with the PRIMUX Matrix Switch.
firmware with instruction for upgrading, go to
AC Line Cord
Country Specific
http://www.networktechinc.com/download/d-kvmswitch-cat5.html
2
Terminating Plug
Quick Start
Manual CD
For updated
.
Guide
Advertisement
Table of Contents
