Table of Contents
Advertisement
NTI PRIMUX MATRIX KVM SWITCH VIA CAT 5
Firmware Configuration Menu
The Firmware Configuration Menu is provided to enable the administrator to update the firmware inside the PRIMUX User Station
and Host Adapters as new or improved features are available. The updated code can be downloaded from the NTI website at
www.networktechinc.com\kvmswitch-cat5.html . This section describes how to update the firmware in the User Station and Host
Adapters.
Please Note: The PRIMUX User Station and Host Adapters used in conjunction with the PRIMUX Matrix Switch must all
be running firmware version 2.0 or later in order to be compatible with the PRIMUX Matrix Switch.
with instruction for upgrading, go to
From the Administration Menu press <F> to get to the Firmware Configuration Menu. (From Command Mode press <A> - <F>.)
The functions of this menu are as follows:
Function
User Station Version
Displays the latest firmware version of this User Station
Last Downloaded Image
Displays the CODE IMAGE info of the last code that was
downloaded to the User Station using the Bootloader
program
Update Host Adapters
To send the downloaded firmware image to a Host Adapter
selected from a list of Host Adapters (page 39)
Go to Bootloader
To leave the OSD menu and activate the Bootloader
Program***.
firmware images and update the firmware in the User Station.
Confirmation required- the user will be prompted with
a "Are you sure? (Y/N)" before acting on the command.
Help
Display topic specific help page
----
Return to the Administration menu
***See the instructions included with the updated code downloaded from the NTI website
cat5.html) for additional information on the Bootloader Program.
Updated code and instructions for using the features above are included with the downloaded file from the NTI website.
http://www.networktechinc.com/download/d-kvmswitch-cat5.html
Figure 39- Firmware Configuration Menu
Description
The Bootloader program is used to download
A serial terminal*** must be connected to the "RS232"
serial port of the User Station to continue operation
Press <Y> to continue, or <N> to cancel.
(www.networktechinc.com\kvmswitch-
38
For updated firmware
.
Keystroke
U
L
P
B
F1
Esc
Advertisement
Table of Contents
