Table of Contents
Advertisement
NTI PRIMUX MATRIX KVM SWITCH VIA CAT 5
The Select Keyboard Language menu enables the user to select a specific language (country code) to be used. Typically only
SUN CPUs require a specific country code to be registered at boot up. (For other types of CPUs this feature may have no effect.)
A list of available languages is displayed and can be scrolled using the mouse (scroll wheel) and/or <up arrow>, <down
arrow>, <Page up>, <Page down>, <Home> and <End> keys.
The language listing having a radio button with a dot in the center is the currently selected language for the keyboard.
•
To manually program a specific keyboard language, select a language and press <Spacebar>.
•
To have the User Station automatically detect the language of the keyboard, select "AutoDetect" and press <Spacebar>.
The list will advance to the actual detected keyboard language and that language will be programmed.
Some keyboards don't have a country code. In this case the selection will remain in the "AutoDetect" position and the default
country code "00" will be programmed in the Host Adapter. If a specific country code is manually programmed, it will be the
country code for the Host Adapter, regardless of the actual country code of the connected keyboard. The programmed country
code is saved in memory and restored each time the User Station is powered-ON. Because the CPUs that use country code (i.e.
SUN CPUs) read it at boot time, it is necessary to reboot the CPU(s) after programming the country code.
Press <Esc> to return to the User Station Configuration menu.
Network Configuration
This screen is only available in Matrix Mode (applicable when used with a PRIMUX Matrix Multi-User KVM Switch)- see
page 36 to change to Matrix Mode.
From the Administration Menu press <N> to get to the Network Configuration Menu. (From Command Mode press <A> - <N>.)
To enable the PRIMUX Matrix to be accessible via Telnet, the IP Address, Gateway, and DNS settings must first be configured.
Function
IP Mode
Toggle, using the <Spacebar> between "Static" or "DHCP".
-
-
IP Address
Open a field to enter an appropriate IP address (default is 192.168.1.22)
Subnet Mask
Open a field to enter an appropriate subnet mask
Gateway
Open a field to enter an appropriate gateway
Preferred DNS
Open a field to enter a preferred DNS address
Alternate DNS
Open a field to enter an alternate DNS address
Telnet
Toggle telnet access between enabled and disabled
Help
Open topic specific help page
----
Exit and return to the Administration Menu
Figure 42- Network Configuration page
Description
In "Static" mode, the user must fill in all appropriate IP settings.
In "DHCP" mode, the DHCP server will fill all IP settings in
automatically.
40
Keystroke
M-Spacebar
I
S
G
P
A
T- Spacebar
F1
Esc
Advertisement
Table of Contents
