Table of Contents
Advertisement
NTI PRIMUX MATRIX KVM SWITCH VIA CAT 5
OSD Settings Menu
To enter the OSD Settings Menu, press <O> from the Settings Menu. (From the Command Mode menu press <T> - <O>.) Using
the OSD Settings, the user can resize and reposition the OSD window on the monitor as desired.
will only affect the logged-in user.
Function
Move OSD Window Down
Move OSD Window Up
Move OSD Window Right
Move OSD Window Left
Make OSD Window Taller
Make OSD Window Shorter
Esc
Change Scan Dwell Time
The scan dwell time determines how long the PRIMUX will stay connected to a Host Adapter (in Scan Mode- page 22) while the
user is idle before switching to the next Host Adapter.
Mode menu press <T> - <T>), a field will appear around the current value for the scan dwell time. The user can enter any value
between 2 and 255 (seconds). The default scan dwell time value is 5 seconds.
Function
Keystroke
Enter value
002-255
Save the new value
Enter or
Exit
Figure 22- OSD Settings Menu
Description
Moves the OSD window down on the monitor
Moves the OSD window up on the monitor
Moves the OSD window to the right on the monitor
Moves the OSD window to the left on the monitor
Makes the OSD window taller on the monitor
Makes the OSD window shorter on the monitor
Exit the OSD Settings menu. Any changes are
automatically saved.
When the <T> is pressed from the Settings Menu (From the Command
Tab
Esc
The default resolution of the OSD menu
is much lower than the average CPU
display setting. We recommend
adjusting the size of the OSD menu
before connecting to a CPU (i.e. make
adjustment immediately after powering
on the User Station, before connecting
to a CPU). Once a CPU connection is
made, the OSD menu will appear smaller
due to the higher resolution setting.
Figure 23- Scan Dwell Time field
24
Changes to the OSD settings
Keystroke
D or
U or
R or
L or
T
S
Esc
Advertisement
Table of Contents
