System Configuration Menu; Figure 46- Telnet- Main Menu; Figure 47- Telnet- System Configuration - Network Technologies PRIMUX-16X64 Installation And Operation Manual

Kvm matrix switch via catx
Hide thumbs Also See for PRIMUX-16X64:
Table of Contents

Advertisement

NTI PRIMUX MATRIX KVM SWITCH VIA CAT 5
The Main Menu shown below will be displayed.

System Configuration Menu

The System Configuration menu provides settings that will effect how the OSD menu system and Host Sharing will behave when
the user is not actively using them.
Configuration submenu.
Function
Description
OSD Logoff Timeout
Set the time in minutes after which a user will be logged out of Command Mode due to inactivity.
Range= 0-255 minutes (value of 0 disables the feature)
OSD Blank Timeout
Set the time in minutes for the OSD screen to blank out due to inactivity- moving the mouse or
pressing a key on the keyboard will redisplay the OSD
Range= 0-255 minutes (value of 0 disables the feature)
Sharing Timeout
When a host is in full share mode (page 47), this is the time after which a user will relinquish control so
that another user may take control.
Range= 2-255 seconds
Menu Logoff Timeout
Set the time in minutes after which an idle user will be automatically logged out of a serial or Telnet
connection
Range= 0-255 minutes (value of 0 disables the feature)
Press the <Up arrow> or <Down arrow> to change a time setting value.
Tip: Press and hold the arrow keys for rapid valu
e changes.

Figure 46- Telnet- Main menu

Select "System Configuration" in the Main Menu and press <Enter> to open the System

Figure 47- Telnet- System Configuration

45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Primux-8x32

Table of Contents