Table of Contents
Advertisement
NTI PRIMUX MATRIX KVM SWITCH VIA CAT 5
Select Hosts to Scan
From the Settings Menu, press <S> for the list of Host Adapters to select for scanning. (From Command Mode press <T> - <S>)
Scan Mode enables the user to scan through selected ports and to have full device control of the connected port. From this menu
the user can select the ports that will be scanned.
Only the selected ports will be scanned in Scan Mode (page 22) when the respective user is logged in. Each user can have a
separate scan list.
A check list with all the Host Adapter index numbers and names followed by a check-box will be displayed in the window.
• unchecked box = the corresponding Host Adapter is not in the scan list
• checked box
= the corresponding Host Adapter is in the scan list
The user can toggle the state of the selected check box by pressing <Spacebar> or clicking the Host Adapter with the mouse.
Function
Description
All
Select all Host Adapters
None
Clear all selected Host Adapters
Find
Locate a Host Adapter by name
Display a Help Page for Hosts to Scan
Exit
Return to the Settings Menu
The scan selection list is automatically saved.
Figure 24- Host Adapters to Scan list
25
Keystroke
A
N
F
F1
Esc
Advertisement
Table of Contents
