Install The User Station; Installation With Ps/2 Devices; Figure 8- Connect The Extended Ps/2 Components To The User Station - Network Technologies PRIMUX-16X64 Installation And Operation Manual

NTI PRIMUX MATRIX KVM SWITCH VIA CAT 5

Install The User Station

The PRIMUX-UZR User Station can be used with either PS/2 or USB devices.
NOTE: If the user keyboard connected is PS/2 (6mD connector), then the mouse must also be PS/2. If the user
keyboard is USB (USB Type A connector), then the mouse must also be USB.
Note: Only PRIMUX-UZR User Stations running firmware version 2.0 or later can be used in conjunction with the PRIMUX
Matrix Switch. To upgrade the firmware, download firmware files and instruction from
http://www.networktechinc.com/download/d-kvmswitch-cat5.html

Installation with PS/2 devices

1. Position the User Station such that the CAT5 cable, the monitor cable, device cables, and the AC adapter power connector
can each reach the User Station without cable strain.
2. Connect the monitor cable to the female 15HD video connector on the User Station.
3. Connect the PS/2 device(s) to the User Station (see Figure 8).
a. Connect the keyboard to the purple female 6 pin miniDIN connector on the User Station.
b. Connect the mouse to the green female 6 pin miniDIN connector on the User Station.
+
6 pin miniDIN
female connectors
PRIMUX-UZR User Station
P S/2
D evices
5V DC
U SB
D evices
2A
R S232 Mo u se K ybd D evices
6 miniDIN
male connectors
PS/2
PS/2 Keyboard
Mouse

Figure 8- Connect the extended PS/2 components to the User Station

.
N TI
Te l:3 3 0 -5 62 - 70 7 0
R NE TW O RK 1 27 5 Da nn er D r
TE CH NO LO G IE S Au rora , O H 4 42 0 2 Fa x :3 3 0- 5 62 -1 9 9 9
IN CO RP O RA TE D
ww w .nti1 .c om
S UN
C at5
Mo n ito r
10
15HD female
video connector
15HD male
video connector
VGA
Multi-Scan
Monitor