4.9 Groups [3]
Delayed Ring
Specifies the Delayed Ringing setting of each member. (Applicable when the call distribution method of the
incoming call distribution group is set to Ring.)
Default
Immediate
Value Range
Immediate, 1–6 Rings, No Ring
Programming References
None
Feature Guide References
1.2.2.2 Group Call Distribution
Wrap-up Time
Specifies the length of time that must pass after completing a call before the member can accept another
call.
Default
0 s
Value Range
10 × n (n=0–300) s
Programming References
None
Feature Guide References
1.2.2.6 Log-in/Log-out
4.9.8
Incoming Call Distribution Group—Queuing Time Table [3-
5-3]
A Queuing Time Table can contain up to 16 sequences which control how calls waiting in a queue are
handled. A maximum of 64 Queuing Time Tables can be programmed.
Queuing Sequence—Sequence 01–16
Specifies the command activated by the corresponding sequence.
Default
None
408
Feature Guide