Panasonic KX-TAW848 Features Manual page 152

1.20 Portable Station (PS) Features
following extension settings of the wired telephone are copied to the extension settings of the PS when
Wireless XDP Parallel mode is activated, and will remain in effect for the PS after the mode is canceled.
– Call Waiting Setting (→ 1.1.3.3 Call Waiting)
– FWD/Do Not Disturb (DND) Setting (→ 1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND))
– Call Pickup Deny Setting (→ 1.4.1.3 Call Pickup)
– Executive Busy Override Deny Setting
– Itemized Billing Code for Automatic Route Selection (ARS) (→ 1.9.1 Automatic Route Selection
(ARS))
– Extension Personal Identification Number (PIN) (→ Extension Personal Identification Number
(PIN) [005]) (→ 1.23.1 Extension Personal Identification Number (PIN))
– COS Programming (→ Class of Service [602]) (→ 2.2.1 Class of Service (COS))
– Extension Group (→ Extension Group [603]) (→ 2.2.2 Group)
– Transfer Recall Destination for Call Transfer and Call Park
• The PS will retain its original settings for the following items even when in Wireless XDP Parallel mode.
These settings can be set on the wired telephone and PS independently, and the settings can be
different.
– Ring Tone Pattern Table Selection (→ 1.1.3.2 Ring Tone Pattern Selection)
– Preferred Line Assignment—Incoming (→ 1.4.1.2 Line Preference—Incoming)
– Preferred Line Assignment—Outgoing (→ 1.5.5.2 Line Preference—Outgoing)
– Hot Line Setting (→ 1.6.1.6 Hot Line)
– Display Language (→ 1.18.4 Display Information)
– Flexible Button Assignment (→ 1.18.2 Flexible Buttons)
– Transfer Recall Destination for Call Transfer and Call Park (The setting assigned to the wired
telephone will first be copied to the PS's extension settings, then can be changed for the PS if
necessary.)
If an extension number is required when changing any PS settings while in Wireless XDP Parallel
mode, use the original extension number assigned to the PS, not the extension number of the paired
(wired) telephone.
• If the Extension Feature Clear is performed, the corresponding extension data for both the wired
telephone and the PS will be cleared. (→ 1.23.2 Extension Feature Clear)
• When a call arrives, both the wired telephone and the PS will ring. However, when one of the following
settings is made, only the telephone which was used to make the setting will ring.
– Automatic Callback Busy
– Transfer Recall
– Hold Recall (→ 1.12.1 Call Hold)
– Call Park Recall
Feature Guide References
1.7.1 Automatic Callback Busy (Camp-on)
1.7.2 Executive Busy Override
1.11.1 Call Transfer
1.12.2 Call Park
User Manual References
1.7.8 Wireless XDP Parallel Mode
152 Feature Guide