Panasonic KX-TAW848 Features Manual page 144

1.19 Voice Mail Features
[DTMF Commands Sent to the VPS]
VPS Access Method
FWD
Intercept Routing
Transfer (pressing the VM Transfer button and
dialing an extension no.)
Pressing the MESSAGE button or similar
operation
* The DTMF commands here are the default commands used by the PBX. Program either the PBX or
your VPS so that these settings match.
[Example of a DTMF Command Sent to the VPS]
CO Line Call
PBX
A CO line call is directed to extension
101, then redirected to the VM service
of the VPS via Intercept Routing.
Extn. 101
Conditions
• After the VPS answers a call, the PBX sends Follow on ID information to the VPS. The amount of time
before the PBX sends this data is programmable.
• After the VPS transfers a call to the PBX via AA service, the PBX sends a DTMF status signal to
indicate the status of the called party. The amount of time before the PBX sends this status signal is
programmable.
144 Feature Guide
Answer by Mailbox
AA
None
Answer by Mailbox
AA
None
The PBX sends the DTMF command:
#6 + 101
Switch to VM service command
DTMF Command Sent to VPS*
When VM (DTMF) Group
is in VM Service Mode
H
#8
No command is sent.
H
#8
No command is sent.
H
H
Mailbox number
VPS
In AA
Service Mode
Mailbox
101
When VM (DTMF) Group
is in AA Service Mode
#6 + H
#8
#6 + H
#8
#6 + H
#6 + H