Dial Type Selection - Panasonic KX-TAW848 Features Manual

1.5 Making Call Features
There are two methods of entering account codes explained below.
One of the methods is selected for each extension based on Class of Service (COS) programming (→
Account Code Mode [508]).
Mode
Option
Forced
Conditions
• An account code can be stored in Memory Dialing (One-touch Dialing, for example).
• Account Button
A flexible button can be customized as the Account button. The Account button is used in place of the
feature number for entering an account code. This button is useful because it can be used at any time,
while feature number entry is allowed only when hearing a dial tone before seizing a CO line.
• Account code entry after receiving a disconnection signal from a CO line must be done while hearing
a reorder tone. Otherwise the SMDR call record is logged and entry becomes impossible afterwards.
• If an account code is entered more than once, the code entered last is logged in the SMDR.
• Even in Forced mode, emergency numbers can be dialed without an account code. (→ 1.5.4.2
Emergency Call)
• Proprietary telephone (PT) users can also enter an account code for incoming CO line calls during a
conversation.
• Verified Code Entry
To identify who made a CO line call for accounting and billing purposes, a verified code can be used.
This code can be used at any extension. (→ 1.8.5 Verified Code Entry)
Feature Guide References
1.18.2 Flexible Buttons
1.21.1 Station Message Detail Recording (SMDR)
User Manual References
1.2.1 Basic Calling
1.5.4.4

Dial Type Selection

Description
The dialing mode (rotary or tone) can be selected for each CO line through system programming (→ LCOT
Dialing Mode [410]) regardless of originating extension (under contract with the telephone company).
Mode
DTMF (Dual Tone Multi-
Frequency)
Pulse Dial (Rotary)
54 Feature Guide
An extension user can enter an account code, but is not required to.
An extension user must always enter an account code before seizing a CO
line.
Numbers dialed by an extension user are transmitted to the CO line using
analog tones.
Numbers dialed by an extension user are transmitted to the CO line using
analog pulses.
Description
Description