4.12 Feature [6]
Printing Message 1–8
Specifies the text of the message output on SMDR when this Printing Message is selected from an
extension.
The "%" character can be used in a message, and requires a number to be entered in its place when the
message is selected from an extension. This character can be used a maximum of seven times in a Printing
Message.
Default
Not stored.
Value Range
Max. 16 characters
Programming References
4.16.1 SMDR [10-1]
Feature Guide References
1.21.1 Station Message Detail Recording (SMDR)
1.21.2 Printing Message
Feature Guide
533