Feature Guide References
1.1.1.2 Direct In Line (DIL)
1.1.1.3 Calling Line Identification (CLI) Distribution
4.15.3 Miscellaneous [9-3]
It is possible to activate the Intercept Routing feature when the destination of an incoming CO line call is
unavailable, or when there is no destination for the call.
Intercept when the destination is Busy
Enables the Intercept Routing—Busy feature to activate when the original destination is busy.
Default
Disable (Busy Tone)
Value Range
Disable (Busy Tone): Sends busy tone to the caller (However, a call through LCOT card will ring at the
original destination while the caller hears a ringback tone.)
Enable: Redirects the call to the intercept destination
Programming References
None
Feature Guide References
1.1.1.4 Intercept Routing
Intercept when the destination sets DND
Enables the Intercept Routing—DND feature to activate when the original destination is in DND mode.
Default
Enable
Value Range
Disable (Busy Tone): Sends busy tone to the caller (However, a call through LCOT card will ring at the
original destination while the caller hears a ringback tone.)
Enable: Redirects the call to the intercept destination
Programming References
None
Feature Guide References
1.1.1.4 Intercept Routing
4.15 CO & Incoming Call [9]
Feature Guide
551