Extension Number; Extension Name - Panasonic KX-TAW848 Features Manual

4.7 Configuration [1]
Fault: The port is not communicating with the PBX.
Programming References
4.7.12 Extension Port [1-5] Port Command
Feature Guide References
None

Extension Number

Specifies the extension number of the port.
To change the extension number of a wired extension, follow the steps below:
1.
Type the new extension number, then click Apply.
2.
Set the status of the extension port to "OUS", then "INS".
When changing the extension number, make sure that the extension port is not in use. If the extension
number is changed while the port is in use, the new extension number will not come into effect.
Default
Starting at 101 (For port 01 of the first extension card that is installed. Extension numbers are preset for
subsequent extensions by adding one to the previous extension number.)
Value Range
Max. 4 digits (consisting of 0–9)
Programming References
4.7.12 Extension Port [1-5] Port Command
Feature Guide References
None

Extension Name

Specifies the extension name of the port. As for the available characters, refer to the character code table
described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Default
Not stored.
Value Range
Max. 20 characters
Feature Guide References
None
PT Property—Type (for APT or Hybrid port)
Selects the port type.
To change the port type of an extension port, follow the steps below:
294 Feature Guide