Panasonic KX-TAW848 Features Manual page 41

[Button Status—FWD/DND Button]
A FWD/DND button shows the current status as follows:
Light Pattern
Red on
Slow red flashing
Off
The status indicated by the "on" and "flashing" patterns can be changed through system programming.
[Button Status—Group FWD Button]
A Group FWD button shows the current status as follows:
Light Pattern
Slow red flashing
Off
[Mode Change]
When either the FWD or DND feature is assigned, pressing the FWD/DND button changes the on/off
setting alternately. When both features are assigned simultaneously, pressing the button changes the
settings as follows:
FWD DND
Note
Pressing the FWD/DND button (fixed button) in idle status will produce one of the following results,
selected through system programming:
When in FWD/DND Setting Mode:
Pressing the button will enter personal programming mode for the FWD/DND setting.
When in FWD/DND Cycle Switch Mode:
Pressing the button will cycle the settings as shown above in [Mode Change].
A FWD/DND button customized on a flexible button is always in FWD/DND Cycle Switch mode,
and the mode cannot be changed.
• When intercom calls are set to be handled differently from CO line calls (forwarding type, forward
destination, DND on/off), we recommend establishing separate buttons for both FWD/DND—Internal
and FWD/DND—External, and/or Group FWD—Internal and Group FWD—External, because:
a)
the light patterns of the FWD/DND—Both button (including FWD/DND button [fixed button]) and
the Group FWD—Both button will indicate the setting for either CO line calls or intercom calls, but
not both.
Note
The FWD and DND icons on a PS display reflect the settings for CO line calls only.
b)
pressing the FWD/DND—Both button (including FWD/DND button [fixed button]) or the Group
FWD—Both button will not change the FWD or DND mode for intercom calls and CO line calls
separately.
1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
Status (default)
DND on
FWD on
FWD/DND off
Status (default)
FWD on
FWD off
Off
Feature Guide 41