3.3 PT Programming
3.3
PT Programming
3.3.1
Programming Instructions
Requirements
PBX settings can be customized through system programming by using a proprietary telephone (PT) with
a display, such as the KX-T7735. To access system programming, the Class of Service (COS) assigned to
the PT's extension must be programmed to allow system programming, or the PT must be connected to the
lowest numbered port on the card installed in the lowest numbered slot.
Only one system programming session can be performed at a time, i.e., only one extension user can access
system programming at a time. This includes PC programming.
For a list of characters that can be entered during system programming, see Section 3.1.3 Entering
Characters.
Buttons and Functions
Fixed Buttons
206
Feature Guide
SP
SP-PHONE
FLASH/RECALL
Function
PREVIOUS
NEXT
(Page up)
(Page down)
SELECT
PROGRAM
STORE
END
CLEAR
FLASH
SECRET