f)
Has a call on a consultation hold (→ 1.12.5 Consultation Hold).
•
This feature is not available for a CO-to-CO line call via Direct Inward System Access (DISA) (→ 1.15.6
Direct Inward System Access (DISA)).
User Manual References
1.2.4 When the Dialed Line is Busy or There is No Answer
1.7.4 Executive Busy Override Deny
1.7.3
Call Monitor
Description
Allows an extension user to listen to a busy extension user's existing conversation. The user can hear the
conversation but will not be heard. If desired, the monitoring user can interrupt the call to establish a three-
party conference call.
Conditions
•
Class of Service (COS) programming determines extension users who can use this feature.
•
This feature is available only when the busy extension is in a conversation with another extension or
outside party.
•
This feature will not function when the busy extension:
a)
Has set Executive Busy Override Deny (→ 1.7.2 Executive Busy Override) or Data Line Security
(→ 1.10.4 Data Line Security).
b)
Is on a conference call (→ 1.13.1 Conference Features).
c)
Is on a doorphone call (→ 1.15.1 Doorphone Call).
d)
Is using Live Call Screening (LCS) or Two-way Record (→ 1.19.2 Voice Mail DPT (Digital)
Integration).
e)
Has a call on a consultation hold (→ 1.12.5 Consultation Hold).
•
This feature stops when the busy extension user presses the following buttons during a conversation
(→ 1.18.1 Fixed Buttons, → 1.18.2 Flexible Buttons):
–
FLASH/RECALL button
–
HOLD button
–
TRANSFER button
–
CONF (Conference) button
–
DSS button
–
EFA button
–
Two-way Record button
–
Two-way Transfer button
–
One-touch Two-way Transfer button
–
Voice Mail (VM) Transfer button
User Manual References
1.2.4 When the Dialed Line is Busy or There is No Answer
1.7 Busy Line/Busy Party Features
Feature Guide
67