Operator (Extension Number)
Specifies the extension number or floating extension number of an incoming call distribution group to be
designated as the tenant operator. When this parameter is left unspecified, a PBX operator serves as the
tenant operator.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Programming References
4.8.3 PBX Operator [2-2]
Feature Guide References
2.2.3 Tenant Service
2.2.5 Operator Features
ARS Mode
Specifies the ARS mode used when making a CO line call.
Default
Same as System Setting
Value Range
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension user makes a call using any Idle Line
Access method.
On for Any CO Access Operation: ARS operates when an extension user makes a call using any CO Line
Access method.
Same as System Setting: The setting specified in ARS Mode in System Setting [8-1] is applied.
Programming References
4.14.1 System Setting [8-1]
Feature Guide References
1.9.1 Automatic Route Selection (ARS)
2.2.3 Tenant Service
System Speed Dial
Indicates the system speed dial table in use by the tenant (reference only).
Default
Basic Memory
4.12 Feature [6]
Feature Guide
531