Panasonic KX-TAW848 Features Manual page 121

*: If the caller's name is not logged, the caller's phone number is displayed.
If the caller's name is logged, the caller's phone number is not displayed.
• If the answering destination is not the original destination (Call Forwarding (FWD)—No Answer,
Intercept Routing—No Answer, Overflow and Call Pickup):
If a call is not answered and forwarded to another destination, or if an extension picks up a call ringing
at another extension, the call is logged in the Incoming Call Logs of both the original and the answering
destination. If a call is forwarded to multiple extensions before being answered, the call is logged in the
call logs of all the extensions it was forwarded to. If a call is forwarded to an ICD group and is not
answered, the call is not logged in the call log for the ICD group.
• Incoming Call Log for Calls to an ICD Group
If a call directed to an ICD group is not answered, the call is logged in the Incoming Call Log of the ICD
group. If the call is answered, it is logged in the call log of the answering extension only.
• Incoming Call Log for Calls to a PS
Each portable station (PS) also has an Incoming Call Log. When a call is directed to a PS, the call will
be logged in the call log of the PS even when:
a)
The PS is out of range.
b)
The PS is turned off.
c)
The Cell Station (CS) is busy.
• Incoming Call Log Display Lock
The Incoming Call Log of an extension can be locked through personal programming (Display Lock) to
prevent other users from viewing its contents. If locked, the Outgoing Call Log and Personal Speed
Dialing are also locked.
An extension personal identification number (PIN) is required to use this feature. (→ 1.23.1 Extension
Personal Identification Number (PIN))
• Incoming Call Log Memory
The total number of incoming calls that can be logged by the PBX is limited. (→ 5.1.1 Capacity of
System Resources) The maximum number of calls that can be logged in the Incoming Call Log of each
extension and ICD group can be specified through system programming. When a call log is full, the
oldest call will be replaced each time a call is received.
• Automatic Caller ID Number Modification
If the PBX is programmed to automatically modify incoming telephone numbers, the modified numbers
will be logged in the Incoming Call Log.
Feature Guide References
1.6.1.4 Speed Dialing—Personal/System
1.16.1 Caller ID
1.18.2 Flexible Buttons
User Manual References
1.11.1 Call Log
3.1.2 Settings on the Programming Mode
1.16 Caller ID Features
Feature Guide 121