Tone Detection - Panasonic KX-TAW848 Features Manual

Feature Guide References
1.5.4.6 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
2.2.2 Group

Tone Detection

Group Name
Specifies the name of the CO line group for programming reference. As for the available characters, refer to
the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance
Console.
Default
Not stored.
Value Range
Max. 20 characters
Programming References
4.15.1 CO Line Setting [9-1]
Feature Guide References
2.2.2 Group
DISA Tone Detection—Silence
Enables the disconnection of a DISA-originated CO-to-CO line call by silence detection.
Default
Disable
Value Range
Disable, Enable
Programming References
4.11.3 DISA—System Setting [5-3-1]
4.15.1 CO Line Setting [9-1]
Feature Guide References
1.15.6 Direct Inward System Access (DISA)
2.2.2 Group
DISA Tone Detection—Continuous
Enables the disconnection of a DISA-originated CO-to-CO line call by continuous signal detection.
Default
Enable
4.9 Groups [3]
Feature Guide 387