Panasonic KX-TAW848 Features Manual page 429

Default
Current slot number
Value Range
Slot number
Programming References
4.7.1 Slot [1-1]
Feature Guide References
None
Port
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Programming References
4.7.11 Extension Port [1-5]
Feature Guide References
None
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.
Type the new extension number, then click Apply.
2.
Set the status of the extension port to "OUS", then "INS".
When changing the extension number, make sure that the extension port is not in use. If the extension
number is changed while the port is in use, the new extension number will not come into effect.
Default
Starting at 101 (For port 01 of the first extension card that is installed. Extension numbers are preset for
subsequent extensions by adding one to the previous extension number.)
Value Range
Max. 4 digits (consisting of 0–9)
Programming References
4.7.12 Extension Port [1-5] Port Command
4.10 Extension [4]
Feature Guide 429