Wireless Xdp Parallel Mode - Panasonic KX-TAW848 Features Manual

Advanced hybrid & wireless pbx
Hide thumbs Also See for KX-TAW848:
Table of Contents

Advertisement

1.20.3 Wireless XDP Parallel Mode

Description
A portable station (PS) can be used in parallel with a wired telephone, i.e., an analog proprietary telephone
(APT), or single line telephone (SLT), allowing an extension user to make or receive calls with either the
wired telephone or the PS. The PS will use the same extension number as the wired telephone, and many
of the wired telephone's extension settings (Call Forwarding [FWD], Class of Service [COS], etc.) are also
used by the PS.
In order to use a PS in Wireless XDP Parallel mode, the mode must be turned on using the PS.
[Example of Wireless XDP Parallel Mode, Parallel Mode]
APT
Parallel Mode
Extn. 102
Conditions
Whether or not a PS is allowed to pair itself with a wired telephone is determined by the COS assigned
to the extension number of the wired telephone. (→ Wireless XDP Parallel Mode for Paired Telephone
[515])
Wireless XDP Parallel mode can be turned on or off using the PS only.
To switch between the wired telephone and the PS during a conversation, simply go off-hook with the
other telephone. Alternatively, to seize a separate line, use another method, such as pressing a CO or
INTERCOM button.
In addition, going off-hook with the other telephone seizes a separate line when the extension is:
a)
Engaged in a conference call. (→ 1.13.1 Conference Features)
b)
Screening a call using Live Call Screening (LCS) or when recording a conversation using Two-way
Record. (→ 1.19.2 Voice Mail DPT (Digital) Integration)
c)
Being monitored by another extension. (→ 1.7.3 Call Monitor)
d)
When the extension has a call on consultation hold. (→ 1.12.5 Consultation Hold)
When a PS in Wireless XDP Parallel mode is on a call, other extension users cannot perform Executive
Busy Override when they call this extension.
When a PS is paired with a wired telephone, most of the extension settings assigned to the wired
telephone (extension number, extension name, etc.) will be used by the PS, and the PS will use its own
extension settings once again when Wireless XDP Parallel mode is canceled. Note, however, that the
PBX
Hybrid Port
Wireless Phone
(or any SLT)
Hybrid
Port
Extension Port
PS
Wired Telephone
(APT, SLT)
Wireless XDP
Parallel Mode
Extn. 103
1.20 Portable Station (PS) Features
Cell Station
Feature Guide
151

Advertisement

Table of Contents
loading

Table of Contents