4.15 CO & Incoming Call [9]
Routing to Operator when the destination is not programmed
Enables the Intercept Routing—No Destination feature to activate when there is no destination for the call.
(The Intercept Routing—No Destination feature always works for the calls through LCOT card, even when
this feature is disabled.)
Default
Enable
Value Range
Disable (Reorder Tone): Sends the reorder tone to the caller
Enable: Redirects the call to an operator
Programming References
None
Feature Guide References
1.1.1.5 Intercept Routing—No Destination
552
Feature Guide