1.5 Making Call Features
1.5.3
Intercom Call
Description
An extension user can call another extension user.
Conditions
•
Extension Number/Name Assignment
Extension numbers (→ Extension Number [003]) and names (→ Extension Name [004]) are assigned
to all extensions. The assigned number and name of the other extension are shown on display PTs
during intercom calls.
•
DSS Button
It is possible to call another extension by simply pressing the corresponding Direct Station Selection
(DSS) button. Any flexible button can be customized as a DSS button.
•
Call Directory—Extension Dialing
A KX-T7735 analog proprietary telephone (APT) user can make a call by selecting stored names on
the display.
•
Alternate Receiving—Ring/Voice
A proprietary telephone (PT) user can select to receive intercom calls by ring tone or by voice, through
personal programming (Alternate Receiving—Ring/Voice). If a user selects voice-calling, the calling
party talks to the user immediately after a confirmation tone. Denying voice-calling can also be
selected.
•
Alternate Calling—Ring/Voice
A caller can change the called party's preset call receiving method (ring tone or voice). By doing so,
ring-calling is switched to voice-calling, or vice versa, at the called party. The called party may deny
voice-calling.
•
Tone after Dialing
After dialing an extension number, a user will hear one of the following:
Type
Ringback Tone
Confirmation Tone
Busy Tone
DND Tone
Feature Guide References
1.18.2 Flexible Buttons
User Manual References
1.2.1 Basic Calling
1.2.5 Alternate Calling—Ring/Voice
1.11.2 Directories
3.1.2 Settings on the Programming Mode
52
Feature Guide
Indicates the called party is being called.
Indicates the called party has set voice-calling.
Indicates the called party is busy.
Indicates the called party has set DND.
Description