System Options-Option 4 [2-9-4] - Panasonic KX-TAW848 Features Manual

4.8 System [2]
Feature Guide References
1.23.4 Timed Reminder
Transfer to busy extension without BSS operation
Enables a transferred call to queue when the transfer destination is busy.
Default
Disable
Value Range
Disable: The call is not transferred. (If the transfer destination sets call waiting notification feature, it is
possible to inform of transferring a call.)
Enable: The transferred call queues to be answered for a time period specified in Transfer Recall Timer in
Timers & Counters—CO / Extension [2-4-1].
Programming References
4.8.5 Timers & Counters—CO / Extension [2-4-1]—Transfer Recall Timer
Feature Guide References
None
4.8.23 System Options—Option 4 [2-9-4]
Various system settings can be programmed.
It is possible to clear the master CS information (Master CS Port and Radio System ID) by following the
procedure below in the batch mode:
1.
Click Clear Master CS.
2.
Click OK. To abort the procedure, click Cancel.
If the system data is downloaded to the PBX after the master CS information has been cleared, it is
necessary to register all PSs again in the interactive mode. Master CS information will be assigned
automatically when a CS is connected to the PBX. Without the Radio System ID, PSs cannot be registered.
Master CS Port
Indicates the location of the master CS port (reference only).
Default
Current slot number-Master CS port number
Value Range
Not applicable.
Feature Guide References
None
376 Feature Guide