Dialing Mode - Panasonic KX-TAW848 Features Manual

Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Programming References
4.7.10 LCO Port [1-4] Port Command
Feature Guide References
None

Dialing Mode

Selects the type of signal used to dial out to the analog CO line.
Default
DTMF
Value Range
DTMF, Pulse
Feature Guide References
None
CPC Signal Detection Time—Outgoing, Incoming
Specifies the length of time required by the PBX to detect a CPC signal on outgoing or incoming CO line
calls before disconnecting the line .
Default
400 ms
Value Range
None, 6.5 ms, 8 × n (n=1–112) ms
Feature Guide References
None
DTMF Width
Selects the length of the DTMF tone sent to the analog CO line.
Default
80 ms
4.7 Configuration [1]
Feature Guide 289