Logging In & Viewing Live Video; Logging In To The Camera Via The Web Client; Before You Begin; Logging In To The Camera - Honeywell 35 Series User Manual

CHAPTER
3
LOGGING IN & VIEWING LIVE VIDEO
This chapter contains the following sections:
•
Logging in to the Camera via the Web
•
Using the Main

Logging in to the Camera via the Web Client

Using the web client, you can monitor live video, play back recorded video, and configure
camera settings.

Before You Begin

Before you log in to the web client, ensure that the following conditions are met:
• The camera is properly connected to the network.
• The camera's IP address and the PC's IP address are in the same network segment. If
there is a router, set the corresponding gateway and subnet mask.
• A network connection has been established. To check this, ping the camera's IP
address. (Enter "ping [IP address]").
Note: The new security enhancements do not allow pinging the camera IP address.

Logging in to the Camera

1. Open Google Chrome, type the camera's IP address in the address bar, and then
click Enter. For example, if your camera's IP address is 192.168.1.108, you would
type https://192.168.1.108.
2. The following window is displayed. Click Advanced.
Honeywell 35 Series IP Cameras User Guide
Client, page
Page, page 13
11
11