IBM System x3100 M4 Type 2582 Problem Determination And Service Manual page 85

Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained
technician.
40000012- Remote access attempt
00000000 failed. Invalid userid or
password received.
Userid is '%1' from
WEB browser at IP
address %2.
(%1 = user ID; %2 = IP
address,
xxx.xxx.xxx.xxx)
40000013- Remote access attempt
00000000 failed. Invalid userid or
password received.
Userid is '%1' from
TELNET client at IP
address %2.
(%1 = user ID; %2 = IP
address,
xxx.xxx.xxx.xxx)
40000014- The [arg1] on system
00000000 [arg2] cleared by user
[arg3].
40000015- IMM reset was initiated
00000000 by user %1.
(%1 = user ID)
40000016- ENET[0]
00000000 DHCP-HSTN=%1,
DN=%2, IP@=%3,
SN=%4, GW@=%5,
DNS1@=%6.
(%1 =
CIM_DNSProtocol
Endpoint.Hostname; %2
= CIM_DNSProtocol
Endpoint.DomainName;
%3 =
CIM_IPProtocolEndpoint.
IPv4Address; %4 =
CIM_IPProtocolEndpoint.
SubnetMask; %5 = IP
address,
xxx.xxx.xxx.xxx; %6 =
IP address,
xxx.xxx.xxx.xxx)
Error A user has
attempted to log in
from a web
browser by using
an invalid login ID
or password.
Error A user has
attempted to log in
from a Telnet
session by using
an invalid login ID
or password.
Info The specified user
has deleted
system log events
or audit log events.
Info The Integrated
Management
Module has been
reset. The logs
provide additional
details.
Info The DHCP server
has assigned an
IMM IP address
and configuration.
1. Make sure that the correct login ID
and password are being used.
2. Have the system administrator
reset the login ID or password.
1. Make sure that the correct login ID
and password are being used.
2. Have the system administrator
reset the login ID or password.
No action; information only.
No action; information only.
No action; information only.
Chapter 3. Diagnostics
65