User Code Mode - Ricoh C231 Service Manual

4.6 USER CODE MODE

With the user code function (SP mode number 120), operators must input an
authorized code before the machine will operate. The machine keeps track of the
number of prints made under each code.
There are 20 user codes as follows:
No. User Code No.
1 382
2 191
3 182
4 173
5 164
6 155
7 146
8 137
9 128
10 119
11 482
12 291
13 282
14 273
15 264
16 255
17 246
18 237
19 228
20 219
- How to use a user code -
1. Enter the user code (3 digits) with the number keys.
2. Press the Enter (#) key.
3. Press the Start key to start printing.
NOTE: The user code is reset if the Clear Modes key and the Clear/Stop key are
pressed together. The user then has to input a user code to use the
machine.
SM
INPUT/OUTPUT CHECK MODE
4-29
C231/C237/C238