Main Drive Timing Belt Tension Adjustment - Ricoh C231 Service Manual

DRUM AND DRIVE SECTION

6.9.7 MAIN DRIVE TIMING BELT TENSION ADJUSTMENT

PURPOSE: After the timing belt is replaced, correct belt tension must be applied
using the procedure below.
[B]
[A]
1. Turn off the main switch and disconnect the power plug.
2. Remove the rear cover (5 screws). (See 6.1.5 Other Covers.)
3. Loosen the screws [A], [B], and [C].
C231/C237/C238
C231R539.WMF
6-46
[C]
SM