Ricoh C231 Service Manual page 544

SCANNER
[D]
[F]
[D]
[E]
C267R906.WMF
3. Loosen the 2 screws [D].
4. Slide the 2nd scanner to align the following holes and marks ( Overview):
st
• Align all four holes: 1
scanner, frame, arm of second scanner and frame
5. Insert the positioning tools [E] [F] through the holes.
6. Check that the scanner belts are properly set in the brackets.
7. Remove the positioning tools.
8. Reassemble the machine and check the operation.
C267 3-14 SM