Change Adjustment Values Or Modes - Ricoh C231 Service Manual

ACCESS PROCEDURE

Change Adjustment Values or Modes

1. After entering the desired SP mode number and pressing the Enter (#)key, the
current value or mode will be displayed on the LCD (at the end of the second
line).
2. Enter the desired value or mode using the number keys (listed in the service
program table).
NOTE: Use the Memory/ Class key to toggle between + and -.
3. Press the Enter (#) key to store the desired value or mode.
4. To cancel the SP mode, press the Clear Modes key.
C231/C237/C238
4-10
SM