Using Service Program Modes - Ricoh C231 Service Manual

5. .SERVICE TABLES

5.1 USING SERVICE PROGRAM MODES

Use the service program modes (SP modes) to check electrical data, change
operating modes, and adjust values.
5.1.1 ACCESSING SP MODES
Entering SP Mode
1. Key in the following sequence.
Method 1:
# 
Hold the E key down for longer than 3 seconds.
Method 2:
# E
Combine key
2. The zoom counter displays "SP1".
3. Go to section 5.1.2.
Leaving SP Mode
#
Press the key one or more times.
SM
USING SERVICE PROGRAM MODES
 E

5-1 C231/C237/C238