Paper Eject - Ricoh C231 Service Manual

ELECTRICAL COMPONENT DEFECTS

4.2.2 PAPER EJECT

Name
Paper Exit Sensor
4.2.3 PAPER FEED
Name
Paper Registration
Sensor
Paper Table Lower
limit Sensor
Paper End Sensor
Paper height sensor 1
Paper height sensor 2
4.2.4 MAIN DRIVE
Name
Clamper Open Sensor
Clamper Close
Sensor
4.2.5 SCANNER
Name
Platen Cover Sensor
Scanner HP Sensor
C267
State
Open The "C" jam indicator is lit.
The "B" jam indicator is lit when a copy is
Shorted
made.
State
Open The "AB" jam indicator is lit.
The "A" jam indicator is lit when a copy is
Shorted
made.
Open The paper table doesn't go down.
The paper table goes down below the
Shorted
sensor, and E-02 is displayed.
Printing can begin even if there is no
Open
paper, and the "A" jam indicator will be lit.
Shorted The "load more paper" indicator is lit.
E-02 is displayed after 1 second from
Open moving up the paper feed table during
printing.
The paper table goes up over the sensor,
Shorted
and E-02 is displayed
E-02 is displayed after 1 second from
Open moving up the paper feed table during
printing.
The paper table goes up over the sensor,
Shorted
and E-02 is displayed
State
Open E-00 is displayed.
E-00 is displayed when the clamper
Shorted
operates.
E-00 is displayed when the clamper
Open
operates.
Shorted E-00 is displayed.
State
The master is made normally, even if the
Open platen cover is open. (Have to push the
start button twice)
The image is treated using center/edge
Shorted
erase mode.
Open E-13 is displayed.
Shorted
4-4
28 March 2006
Symptoms
Symptoms
Symptoms
Symptoms
SM